Kodak 9520 User Manual page 54

Document scanner
Hide thumbs Also See for 9520:
Table of Contents

Advertisement

5-18
Replacing the separator roller:
1. Open the front cover.
2. Push the roller cover release lever toward the back of the machine.
3. Grasp and rotate the roller cover toward the back of the machine,
exposing the feeder module and separator roller.
4. Lift and remove the separator roller cover plate.
5. Lift the separator roller out of the grooved brackets.
6. Reinsert a new separator roller by aligning the pins in the grooved
brackets.
7. Reinsert the separator roller cover plate.
8. Close the feeder cover.
9. Close the front door.
Roller cover
Feeder module
Separator roller
Grooved brackets
Roller cover
release lever
A-61139 May 2001

Advertisement

Table of Contents
loading

Table of Contents