Table of Contents
Advertisement
5-10
5. Slide the lower roller housing assembly out of its housing and
vacuum inside the housing.
IMPORTANT: Do not slide the lower roller housing assembly back
into place without first removing the imaging guides.
Failure to remove them first can cause misalignment
and/or damage to the machine.
6. Slide the lower roller housing assembly back into its original
position.
7. Replace the imaging guides.
8. Vacuum the screen located at the base of the transport system.
9. Raise the baffle plate and push it into its original position. Turn the
vertical baffle handle and latch it into place.
10. Close the right-side access door and top cover.
A-61139 May 2001
Advertisement
Table of Contents
