Kodak A-61003 User Reference Manual
  1. Manuals
  2. Brands
  3. Kodak Manuals
  4. Scanner
  5. A-61003
  6. User reference manual
Kodak A-61003 User Reference Manual

Kodak A-61003 User Reference Manual

Kodak user's reference scanner a-61003
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Reference
A-61003
Part Number 636985
September 1993
KODAK
™
IMAGELINK
Microimager 70,
Scanner 900,
Scanner 923,
Scanner/Microimager 990
OFFICE IMAGING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A-61003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kodak A-61003

Summary of Contents for Kodak A-61003

  • Page 1 User's Reference A-61003 Part Number 636985 September 1993 KODAK ™ IMAGELINK Microimager 70, Scanner 900, Scanner 923, Scanner/Microimager 990 OFFICE IMAGING...

  • Page 2: Table Of Contents

    • How to load film into a cassette • How to load a cassette into the machine • How to unload a partially exposed roll of film • How to unload a fully exposed roll of film A-61003 September 1993...
  • Page 3 OPERATOR INTERFACE Mode Name/Number Image Address FFF.003.002.001 Mode 10 Please wait... Operator Message Film Mode Indicators: Scan Mode Indicators: Document Level Indicators: A-61003 September 1993 Status Display Film Mode Indicator Scan Mode Indicator Lens Reduction (if applicable) Simplex Duplex Simplex Duplex (one-sided;...
  • Page 4 Used to decrement values at a slower rate. Also used to backspace, delete the last keystroke, or clear messages in the Status Display. Also used when entering an alphanumeric character in the Image Address. EB-2 Plus Key A-61003 September 1993...
  • Page 5 Used to perform specific functions. The P Keys have default values; any or Keys all of the defaults may be overridden/reprogrammed at installation. (P Keys) Used to momentarily turn on (jog) the transport system. Transport Jog Used to help clear document jams. A-61003 September 1993 Film Advance (if applicable) Transport Jog EB-3...
  • Page 6 Used to identify the next document fed into the transport as a Level 2 document. Level 3 Key Used to identify the next document fed into the transport as a Level 3 document. EB-4 Numeric Keys Level 2 Key Level 1 Key Decimal Key A-61003 September 1993...
  • Page 7 Documents in the transport system when the Stop key is pressed will be processed and placed in the exit hopper before the transport system stops. Enter Used to enter data for a Function Code or an Image Address change. A-61003 September 1993 Clear/Cancel Next NEXT...

  • Page 8: An Operations Checklist

    Feed documents. Press the Stop key. Remove documents from the exit hopper. Unload film cassette(s) from the machine. Unload film from the cassette(s), if necessary. Turn off side panel switch. Turn off main power switch, if necessary. A-61003 September 1993...
  • Page 9 Scanner 900 or Scanner 923: A-61003 September 1993 Setup: Turn on main power switch, if necessary. Turn on side panel switch. Calibrate the machine. Adjust the feed/separator rollers. Adjust the feed shelf. Adjust the feeder side guides. Adjust the exit hopper side guides.
  • Page 10 Press the Stop key. Execute Scanner End-of-Job. Remove documents from the exit hopper. Unload film cassette(s) from the machine. Unload film from the cassette(s), if necessary. Turn off side panel switch. Turn off main power switch, if necessary. A-61003 September 1993...

  • Page 11: A Maintenance Checklist

    MAINTENANCE CHECKLIST A-61003 September 1993 Daily maintenance: Clean the accessories. (DSA, Document Printer, etc.) Clean the imaging guides. Weekly maintenance: Clean the cabinet. Clean the feed and separator rollers. Clean the mirrors, if applicable. Vacuum inside the machine. Monthly maintenance: Check the air filter;...

  • Page 12: Clearing The Document Path

    • Reset the Image Address, Level, etc., if necessary. • Refeed the documents. If an error code appears in the Status Display, check each transport area again to make certain that all documents have been cleared. A-61003 September 1993...

  • Page 13: Function Codes

    FUNCTION CODES USING FUNCTION CODES A-61003 September 1993 There are a variety of functions available which may be used to temporarily change operating conditions and values, and to obtain system and accessory status information. To execute a function code: • Press the F key.

  • Page 14: Function Code Summary

    AEC On/Off AEC Auto Adjust AEC Fixed Adjust Display Film Remaining† Film Advance† Film Leader† Lead End Code Trail End Code Advance Film to End of Roll Scanning** Scanner Calibration Latched Scanning Flag† Momentary Scanning Flag† Scanner End-of-Job A-61003 September 1993...
  • Page 15 Sort Next Doc. Only into Specified Bin† F81 Sort All Doc. into Specified Bin Endorser Endorser On/Off Endorser Mode Endorser Print Position Footswitch Footswitch Confirmation Tone*** A-61003 September 1993 OCR*** OCR On/Off Patch Reader Patch Reader 1 On/Off Patch Reader 2 On/Off*** End Fed Patch Reading On/Off*** Patch Reading Confirmation Tone*** Omit Patch Reading on Next Doc.†...

  • Page 16: Function Code Listing

    • Press the Clear key at any time to return to a normal operating display. • Press the Clear key to return to a normal operating display. none A-61003 September 1993...
  • Page 17 Reset Level Counts Allows you to reset all counters (Level 0, Level 1, Level 2, and Level 3). A-61003 September 1993 Additional Input • Press the Clear key to return to a normal operating display.
  • Page 18 • Enter the new time in the format illustrated. • Press the Enter key. • Enter the new date in the format illustrated. • Press the Enter key. • Press the Clear key to return to a normal operating display. A-61003 September 1993...
  • Page 19 Display Film Remaining Allows you to display the amount of film remaining in each film cassette. A-61003 September 1993 Additional Input • Enter the number one (1) to turn AEC ON; or enter the number zero (0) to turn AEC OFF.
  • Page 20 (3) digits. • Press the Enter key. To enter a new cassette ID number: • Enter a new cassette ID number, up to two (2) digits. • Press the Enter key. • Feed calibration target. none A-61003 September 1993...
  • Page 21 Omit Printing on Next Document Only Allows you to omit printing by all document printers on the next document only. A-61003 September 1993 Additional Input • Enter the number one (1) to select the leftmost ink jets; or enter the number two (2) to select the center ink jets;...
  • Page 22 ON. • Press the Enter key. • Enter the number zero (0) to turn the secondary patch reader OFF; or enter the number one (1) to turn the secondary patch reader ON. • Press the Enter key. A-61003 September 1993...
  • Page 23 Endorser Mode Allows you to display the current endorser mode and/or change the endorser mode. A-61003 September 1993 Additional Input • Enter the number zero (0) to turn end-fed patch reading OFF; or enter the number one (1) to turn end-fed patch reading ON.
  • Page 24 (0) to read bar codes on the next document. • Press the Enter key. • Enter the number of the bar code test you want to perform: 1=Evaluate; 2=Display; 3=%Kodak; or 4=%Norm. • Press the Enter key. A-61003 September 1993...
  • Page 25 Momentary Scanning Flag Allows you to set a flag which alerts the host system that the next document only is of special interest. A-61003 September 1993 Additional Input • Enter the number zero (0) to turn partial bar code reading OFF; or enter the number one (1) to turn partial bar code reading ON.
  • Page 26 To enter an alphabetic character: • Press the up or down arrow key. • Press the left or right arrow key to position the highlighted cursor over the character to be placed in the Fixed Field. • Press the Enter key. A-61003 September 1993...
  • Page 27 Allows you to input the next Image Address. Stop Allows you to stop the transport. Allows you to turn on the transport. A-61003 September 1993 Additional Input • Press any arrow key to toggle between the two available options. • Press the Enter key. none...

  • Page 28: Operator Messages

    - Wait for all information currently held in the buffer to be transferred - Turn off the Scanner/Microimager transport using the side panel - Turn off the Scanner/Microimager power using the main power - Wait 10 - 30 seconds.

  • Page 29: Operator Messages Listing

    Replace lower cassette battery. Press the Run key to continue. Change the lamps when the current set of documents has been processed. Press the Run key to continue. Change the lamps when the current set of documents has been processed. A-61003 September 1993...
  • Page 30 E125 E126 Enter correct command E127 Feeder waiting for host system E128 Feeder adjustment warning A-61003 September 1993 Description/Action Required Invalid patch was used. Feed correct patch. Use the NEXT key to enter correct Image Address. Check the current document image level.
  • Page 31 Use function code F08 to determine the last Image Address. Use the NEXT key to correct the Image Address, if necessary. Replace the cassette(s) with one(s) that match the film mode setup, or change the film mode setup. A-61003 September 1993...
  • Page 32 E213 End of side 2, start trail code E214 Document length error - refeed E215 No image mark - Refeed by hand A-61003 September 1993 Description/Action Required Use the NEXT key to enter the correct Image Address, or change cassette(s).
  • Page 33 Press the Clear key. Press the Jog key. Press the Run key and refeed document(s). Perform maintenance/cleaning procedures. Open the access door. Verify that all operator accessible areas are properly closed. Press the Run key to continue. A-61003 September 1993...
  • Page 34 E246 Conflicting input - what level? E249 Select duo or change cassettes E250 Use other side of upper cassette A-61003 September 1993 Description/Action Required Press the Jog key. Press the Run key. Try again. Close all access doors. Press the Run key to continue.
  • Page 35 Press the Clear key. Press the Run key to continue. Check film threading in the lower cassette. Press the Clear key. Press the Run key to continue. Press the Clear key. Enter function code F31 to generate lead end code. A-61003 September 1993...
  • Page 36 E275 Select proper lens for this mode E276 Check lens turret seating E280 Feeder off due to host request A-61003 September 1993 Description/Action Required Press the Clear key. Enter function code F32 to generate trail end code. Press the Clear key.
  • Page 37 OCR Workstation interface. Correct the error. Rerun the batch. The machine has been disabled due to an error. Determine the cause of the error via the host system. Enable the machine. Press the Run key to continue. A-61003 September 1993...
  • Page 38 E503 E512 E513 E550 E551 E552 E553 E562 E563 A-61003 September 1993 Description/Action Required Replace the exposure lamps. Recalibrate the machine. Contact your System Administrator to initiate the required action on the host system. Perform maintenance/cleaning procedures for the Document Scanning Array, Image Guides, etc.
  • Page 39 Turn the main power switch off. Wait five (5) to ten (10) seconds. Turn the main power switch on. Turn the side panel switch on. If the error repeats, or if additional errors are received, call service. A-61003 September 1993...
  • Page 40 E899 E900 various messages through E999 A-61003 September 1993 Description/Action Required Turn the side panel switch off. Turn the main power switch off. Wait five (5) to ten (10) seconds. Turn the main power switch on. Turn the side panel switch on.

  • Page 41: Film Basics

    Replace with a fresh battery immediately to avoid losing display information. Side Two Symbol - the side two symbol appears only when filming in duo mode and the cassette is to be reinserted for filming on the second side. A-61003 September 1993 FB-1...
  • Page 42 Place the cassette on a flat surface, with the top cover side up. Press down on the cover latch and turn counterclockwise to unlock the top cover. Remove the top cover and set it aside. A-61003 September 1993...
  • Page 43 10. Slowly rotate the spool until the two round holes on the 11. Lower the light guard. A-61003 September 1993 Open a new box of microfilm and remove the spool of film. NOTE: Save the empty box to store the exposed film prior to processing and for storing the film following processing.
  • Page 44 15. Insert the folded end of the film into the slot in the take-up 16. Rotate the spool counterclockwise to secure the film on the FB-4 idler roller, following the path indicated by the threading arrows inside the film cassette. film. side up. spool core. spool. A-61003 September 1993...
  • Page 45 19. Slowly rotate the take-up spool couterclockwise three 20. Replace the top cover on the cassette. Press down on the NOTE: If the film has been properly loaded, the film supply A-61003 September 1993 hold it in this position. complete turns to secure the film onto the spool. Allow the release lever to return to its normal position.
  • Page 46 Swing the drive release lever (green handle) out. Insert film cassette(s). door for cassette orientation. The display on the film cassette is oriented differently depending upon the film slot being used. Swing the drive release lever back into place. Close the cassette access door. A-61003 September 1993...
  • Page 47 It is assumed that all documents have been deposited in the exit hopper and the Stop key has been pressed. 10. Cut the film with a pair of scissors; cut where indicated A-61003 September 1993 Do not unload a partially exposed roll of film when using duo mode.
  • Page 48 Allow the release lever to return to its normal position. cover latch and turn it clockwise to lock the cover in place. and filming may continue. A-61003 September 1993...
  • Page 49 Stop key has been pressed. 10. Write identification data (i.e., subject, title, date, job NOTE: Replace the top cover back on the cassette(s), A-61003 September 1993 Enter function code F29 Advance Film to End of Roll.

  • Page 50: Programmable Keys

    PROGRAMMABLE KEYS P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 Programmable Keys (P Keys) P-key Function(s)

  • Page 51: Application Modes

    APPLICATION MODES Mode Mode Number Name Application(s)
  • Page 52 Office Imaging EASTMAN KODAK COMPANY Rochester, New York 14650 Kodak and Imagelink are trademarks. The new vision of Kodak A-61003 9/93 ©Eastman Kodak Company, 1993 Printed in U.S.A.

This manual is also suitable for:

Imagelink 70Imagelink 900Imagelink 923Imagelink 990

Table of Contents