Table of Contents
Advertisement
Code
Function Code Name
F40
All Document Printers
On/Off
(for Document Printers 1
and 12)
F40
Print Head Position
(for Super12 Document
Printer)
F41
Primary DP1 On/Off
F42
Secondary DP1 On/Off
F43
Document Printer 12/
Super12 On/Off
F44
Omit Printing on the Next
Document Only
F45
Print Test (for Document
Printers 1 and 12)
F45
Print Test
(for Super12 Document
Printer)
A-61139 March 2000
Allows you to turn all Document Printers (primary DP1,
secondary DP1 and DP12) on or off. Enter 1 to turn on or
0 to turn off, then press Enter.
Allows you to change the print heads or clean the printer.
This function can only be performed when the transport is
off. Enter 1 to Change Heads or 2 to Clean Printer, then
press Enter.
Allows you to turn the primary Document Printer 1 on or
off. Enter 1 to turn on or 0 to turn off, then press Enter.
NOTE: If the Super12 Document Printer is installed, a
message indicating "Unassigned Function" will be
displayed.
Allows you to turn the secondary Document Printer 1 on
or off. Enter 1 to turn on or 0 to turn off, then press Enter.
NOTE: If the Super12 Document Printer is installed, a
message indicating "Unassigned Function" will be
displayed.
Allows you to turn the Document Printer 12 or Super12
Document Printer on or off. Enter 1 to turn on or 0 to turn
off, then press Enter.
Allows you to specify no information be printed on the
next document scanned. Printing will resume on
subsequent documents. Enter 1 to omit printing on the
next document, or enter 0 to print on the next document
then press Enter.
NOTE: If you enter F44 and then F45, the Omit Printing
Status on Next Document will be cleared.
Allows you to test the position and print quality of all
Document Printers installed. Enter the number of the print
test you want to perform.
1=Print IA test
2=Prime test
This function can be done when the transport is off.
Allows you to test the position and print quality of the
Super12 Document Printer. Enter the number of the print
test you want to perform.
1=Mode Image — will print the current image for the level
and mode you are in.
2=Test Pattern — will print a preloaded test image.
This function can be done when the transport is off.
NOTE: If you enter F44 and then F45, the Omit Printing
Status on Next Document will be cleared.
Description
3=Shift test
4=Standard test
4-7
Advertisement
Table of Contents
