Kodak 9520 User Manual page 34

Code Function Code Name
F46 Print Position
F48 Purge Print Pattern
(for Document Printers 1
and 12)
F48 Print Purge Head
(for Super12 Document
Printer)
F49 Purge Frequency
(for Document Printer 1
and 12)
F49 Align Print Image
(for Super12 Document
Printer)
F50 Patch Reader 1 On/Off
F51 Patch Reader 2 On/Off
F52 End Fed Patch Reading
On/Off
F53 Patch Reading
Confirmation Tone On/Off
F56 Printer Open Jet Test
(for Document Printers 1
and 12)
F56 Printer Cartridge Status
(for Super12 Document
Printer)
F57 Endorser On/Off
4-8
Allows you to specify how far from the leading edge of the
document printed information will appear. Press the Up
arrow to increment the starting print position by 1 inch
(25 mm), press the Down arrow to decrement the starting
print position by 1 inch (25 mm). Press the Right arrow to
increment the starting print position by 0.125-inch (3 mm),
or press the Left arrow to decrement the starting print
position by 0.125-inch (3 mm), then press Enter.
Allows you to initiate an immediate priming ink spurt.
Allows you to initiate an automatic purging of the print
heads.
This function can be done when the transport is off.
Allows you to specify how often, in terms of the number of
documents fed into the transport, a priming ink spurt is
initiated. Enter the number of documents, up to 50,000
and press Enter.
Allows you to specify how far to move the left half of an
image up or down (in increments of one line) on the
document so it will align with the right half of the image.
Allows you to turn the primary Patch Reader on or off.
Enter 1 to turn on or 0 to turn off, then press Enter.
Allows you to turn the secondary Patch Reader on or off.
Enter 1 to turn on or 0 to turn off, then press Enter.
Turn End Fed Patch Reading on if you expect the patch to
be located in the vertical (vs. horizontal) position on the
document. Enter 1 to turn on or 0 to turn off, then press
Enter.
Allows you to turn the confirmation tone on or off which
informs you when the Patch Reader has successfully read
a patch document. Enter 1 to turn on or 0 to turn off, then
press Enter.
Allows you to determine whether or not there are
nonfunctional ink jets in the Super12 Document Printer
ink cartridge. Press C to return to a normal operating
display.
Allows you to determine whether or not there are
nonfunctional ink jets in the Super12 Document Printer.
Also checks the print head(s) connection to the flex cable
to assure the print heads(s) are installed properly. Press
C to return to a normal operating display.
Allows you to turn the Endorser on or off. Enter 1 to turn
on or 0 to turn off, then press Enter.
Description
A-61139 March 2000