Table of Contents
Advertisement
Dynamic bar code
evaluation
9-14
Dynamic Bar Code Evaluation allows you to verify the speed of the Bar
Code Reader and how well your Bar Code Reader is working. This
test is performed with the transport on. Follow the procedures below
to perform the Dynamic Bar Code Evaluation test.
After selecting option 2=Transport On, the following message is
displayed:
Bar Code Type=
Leading edge distance (in):
1. Measure the distance from the leading edge of the document to the
center of the bar code.
leading edge
2. Enter the distance from the leading edge of the document to the
center of the bar code.
3. Press Enter. The transport will turn on.
4. Feed the bar code document.
5. Go to the section entitled, "Evaluating test results" to review the test
results.
distance
measured
center of
bar code
A-61139 March 2000
Advertisement
Table of Contents
