Kodak 9520 User Manual page 59

Code Operator Message Displayed
E204 Double document — refeed
E205 Level overflow — press next level
E206 Check print head
E207 Check printer installation
E211 Enter correct Image Address
E214 Document length error — refeed
E219 Clear error and refeed last doc
E220 Check for jam in entrance transport
E221 Clean entrance sensor
E225 Check for jam in transport
E226 Clean slide-out sensor reflector
E227 Check for jam in transport
E228 Check for jam in upper transport
E229 Clean exit sensor
6-4
Description/Action Required
Press Clear and use the Next key to enter
the correct image address and refeed
document(s). For more information see
Chapter 8, Using the Multi-Feed Detector.
Press Clear and use the Next key to enter
the correct image address, or press a level
key for a higher level.
Install the correct Document Printer print
head.
Document Printer not correctly installed.
Properly install the Document Printer print
head.
Use the Next key to enter the correct image
address.
Press Clear and use the Next key to enter
the correct image address and refeed
document(s).
Press the Clear key. Press Run and feed the
last document.
Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
Perform maintenance/cleaning procedures.
Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
Perform maintenance/cleaning procedures.
Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
Perform maintenance/cleaning procedures.
A-61139 March 2000