Adjusting the exit
hopper side guides
and end stop
2-8
The exit hopper side guides and end stop must be adjusted so
documents are stacked properly after processing.
1. Adjust the side guides on the exit hopper to match the adjustment
of the side guides on the feed shelf.
Exit hopper
label
End
stop
Exit hopper
2. Adjust the end stop of the exit hopper by determining the longest
document to be processed. Slide the end stop until the arrows point
to where the length of the longest document is shown on the exit
hopper label.
Arrow
11-inch (A4)
Checks
IBM cards
5-inch
8 ½-inch (A5)
Arrow
14-inch (B3)
17-inch with
adapter (A3)
Side
guides
(arrows
depict correct
placement of
side guides)
A-61139 March 2000