Time Settings - Kodak Scan Station 520EX Administrator's Manual

Time settings

3-30
1. Click the Time icon.
2. Select Time Zone to select your appropriate time zone.
3. Select Daylight Savings and select Automatically Adjust or No
Adjustment.
4. Select Clock and select either a 12 Hour or 24 Hour time format.
5. Select Separator and select the separator symbol.
6. Click Format and select the hours, minutes, and seconds format.
NOTE: The actual time and date of the Scan Station can only be set
manually by using a USB flash drive that contains an
administrative configuration file. Currently, you cannot set the
time and date of the Scan Station remotely. See the sections
entitled, "Setting the Scan Station clock" and "Setting the Scan
Station date" later in this chapter for more information.
A-61628 March 2010