Table of Contents
Advertisement
Cleaning the feeder
module and separator
roller (automatic feeder)
5-6
Clean the feeder module and separator roller daily to prevent ink, toner,
and dust from collecting on the rollers and preventing documents from
separating.
IMPORTANT: Do not use alcohol on feed or separator rollers. It is
recommended that you use the Roller Cleaning Pads to
clean the feed and separator rollers.
Cleaning the feeder module and separator roller:
1. Open the front cover.
2. Push the roller cover release lever toward the back of the machine.
3. Grasp and rotate the roller cover toward the back of the machine,
exposing the feeder module and separator roller.
4. Remove the feeder module by pushing it to the right and lifting it out
of its position.
5. Hold the feed rollers and scrub them with the Roller Cleaning Pad
until all residue is removed.
6. Wipe the feed roller with a clean, dry, lint-free cloth.
7. Clean both rollers of the feeder module.
8. Replace the feeder module, by aligning the pins and fitting it into
position.
Roller cover
release lever
Roller cover
Feeder
module
A-61139 May 2001
Advertisement
Table of Contents
