Table of Contents
Advertisement
5
Maintenance
Cleaning tasks
Cleaning materials
A-61139 May 2001
To keep your scanner in good operating condition, the following tasks
should be performed:
Cleaning the imaging guides (daily or at least every 30,000
documents)
The imaging guides require cleaning. The frequency of cleaning
depends on several factors including documents fed per hour,
document condition and site environmental conditions. The imaging
guides should be cleaned at least once per day and more often if
required.
Cleaning the feed and separator roller (semi-automatic feeder)
(daily)
Cleaning the feeder module and separator roller (automatic feeder)
(daily)
Cleaning the paper path (daily)
Vacuuming inside the scanner (daily)
Cleaning the exposure lamp housings (weekly)
Cleaning the cabinet (weekly)
Cleaning the air filter (weekly)
For additional maintenance and feeder adjustment information, see
Kodak publication A-61604. This publication is part of the Maintenance
and Feeder Adjustment procedure video; CAT No. 828 5306.
Materials needed to perform maintenance procedures are:
A mild cleaning agent
A quality lens cleaner
A soft, clean, lint-free cloth
A soft-bristled cleaning brush
A vacuum cleaner
Staticide Wipes or equivalent
Roller Cleaning Pads
Paper Path Cleaner
IMPORTANT: Do not use any unauthorized commercial cleaning
solvent in any of the cleaning procedures.
5-1
Advertisement
Table of Contents
