Table of Contents
Advertisement
Setting the date
and code number
9-38
To set the date and code number:
1. Open the top cover.
2. Push down the locking lever.
Endorser
Locking
lever
3. Press down on and hold the latch to unlock the Endorser.
4. Rotate the Endorser toward the back of the unit.
NOTE: The index plate contains markings which identify the date
characters and the code numbers.
Date knob
5. Slide the date knob out to the left until the colored band on the knob
is opposite the appropriate mark on the index plate.
6. Rotate the date knob clockwise or counterclockwise to set the month,
day, year, or code number required for endorsing.
Stamp
Colored
band
Index
Plate
Latch
(Endorser rotates
to the right)
A-61139 March 2000
Advertisement
Table of Contents
