Table of Contents
Advertisement
Error recovery
Interactive/online method
8-6
5. Close the front cover.
6. If desired, calibrate and re-enable the Multi-Feed Detector . See the
section entitled, "Calibrating the Multi-Feed Detector " for more
information.
Error recovery methods are required when a multi-feed has been
detected. The two methods described below meet the needs of most
users. However, other methods may be used.
IMPORTANT: Before beginning error recovery, make sure all images and
headers have been transferred from the image buffer to the
host system.
Use the Interactive/Online method when your primary concern is that
the scanned database has no duplicate images.
Follow these steps to use the Interactive/Online method:
1. At the host system, search through the most recently scanned files to
determine which images have been scanned and transferred.
2. Find the last successfully scanned image. Record/remember the
sequential ID number and/or the image address assigned to the last
successfully scanned image.
3. Sort through the stack of documents being scanned to find the
document that produced the last successfully scanned image. You will
have to rescan all of the documents that follow the last successfully
scanned document.
4. Download the sequential ID number and/or the next image address.
The value(s) you download should correspond to the document
following the last successfully scanned image.
5. Begin scanning the documents that follow the last successfully
scanned document.
NOTE: Documents detected as multi-feeds and the documents directly
following are not scanned.
A-61139 March 2000
Advertisement
Table of Contents
