Table of Contents
Advertisement
Daily maintenance
procedures
Cleaning the imaging
guides
A-61139 May 2001
Maintenance procedures that should be performed daily include
cleaning the feed and separator rollers, the paper path, vacuuming
inside the scanner, and cleaning the imaging guides.
NOTE: Imaging guides may need to be cleaned more frequently; and
should be cleaned last.
To clean the imaging guides, follow the steps below:
IMPORTANT: Do not use any abrasive materials when cleaning the
1. Open the right-side access door.
NOTE: The illustration below shows the rear view of the scanner.
Upper lamp
housing assembly
Upper imaging guide
Lower image guide
Lower lamp housing
assembly
Upper imaging guide
Lower imaging guide
2. Locate and grasp the end of the upper imaging guide. Carefully
slide the imaging guide out of its track.
3. Locate and grasp the end of the lower imaging guide. Carefully
slide the imaging guide out of its track.
4. Remove dust from the imaging guides, using a soft bristle brush.
imaging guides. This includes abrasive cleansers,
commercial solvents, paper towels, or coarse cloths.
Right-side access door
5-3
Advertisement
Table of Contents
