A-61139 May 2001
Cleaning the separator roller:
1. Open the front cover.
2. Push the roller cover release lever toward the back of the machine.
3. Grasp and rotate the roller cover toward the back of the machine,
exposing the feeder module and separator roller.
4. Lift and remove the separator roller cover plate.
5. Lift the separator roller out of the grooved brackets.
6. Hold the separator roller and scrub it with the Roller Cleaning Pad
until all residue is removed.
7. Wipe the separator roller with a clean, dry, lint-free cloth.
8. If the roller shows signs of wear, obtain and replace the separator
roller.
9. Replace the separator roller by aligning the pins in the grooved
brackets.
10. Reinsert the separator roller cover plate.
11. Close the feeder cover.
12. Close the front door.
Roller cover
Feeder module
Separator roller
Grooved brackets
Roller cover
release lever
5-7