Configuring A Large Scale Ipv6 Mbgp Network; Configuration Prerequisites; Configuring An Ipv6 Mbgp Peer Group; Configuring Ipv6 Mbgp Community - HP 4800G Series Configuration Manual

Configuring a Large Scale IPv6 MBGP Network

Configuration Prerequisites

Before configuring the following tasks, you need to configure IPv6 MBGP basic functions.

Configuring an IPv6 MBGP Peer Group

For easy management and configuration, you can organize some IPv6 MBGP peers having the same
route update policy into a group, known as a peer group. A policy configured for a peer group applies to
all the members in the group.
Follow these steps to configure an IPv6 MBGP peer group:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Create an IPv6 BGP peer
group
Add a peer to the peer group
Exit to BGP view
Enter IPv6 MBGP address
family view
Enable the configured IPv6
unicast BGP peer group to
create the IPv6 MBGP peer
group
Add the IPv6 MBGP peer into
the peer group
To create an IPv6 MBGP peer group, you need to enable an existing IPv6 unicast peer group in
IPv6 MBGP address family view.
Before adding an IPv6 MBGP peer to the IPv6 MBGP peer group, you need to add the
corresponding IPv6 BGP unicast peer to the corresponding IPv6 BGP unicast peer group.

Configuring IPv6 MBGP Community

A peer group allows a group of peers to share the same policy, while a community allows a group of
IPv6 MBGP routers in multiple ASs to share the same policy. The community attribute is propagated
among IPv6 MBGP peers and not restricted to AS boundaries.
Use the command...
system-view
bgp as-number
ipv6-family
group ipv6-group-name
[ external | internal ]
peer ipv6-address group
ipv6-group-name [ as-number
as-number ]
quit
ipv6-family multicast
peer ipv6-group-name enable
peer ipv6-address group
ipv6-group-name
1-12
Remarks
—
—
—
Required
Required
By default, no peer is added.
—
—
Required
Required
By default, no peer is added.