Displaying And Maintaining Ssh - HP 6125XLG Configuration Manual

Task
Connect to the
SCP server,
and transfer
files with the
server.

Displaying and maintaining SSH

Execute display commands in any view.
Task
Display the source IP address or source
interface information configured for the SFTP
client.
Display the source IP address or source
interface information configured for the Stelnet
client.
Command
•
Connect to the IPv4 SCP server, and transfer files with this server:
In non-FIPS mode:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put |
get } source-file-name [ destination-file-name ] [ identity-key { dsa |
rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 |
aes256 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des }
| prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 }] *
[ publickey keyname | source { interface interface-type
interface-number | ip ip-address } ] *
In FIPS mode:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put |
get } source-file-name [ destination-file-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 |
prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 }] * [ publickey keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
Connect to the IPv6 SCP server, and transfer files with this server:
In non-FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i
interface-type interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } | prefer-compress
zlib | prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5
| md5-96 | sha1 | sha1-96 }] * [ publickey keyname | source
{ interface interface-type interface-number | ipv6 ipv6-address } ] *
In FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i
interface-type interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa | prefer-compress zlib |
prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 |
sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 }] * [ publickey
keyname | source { interface interface-type interface-number | ipv6
ipv6-address } ] *
Command
display sftp client source
display ssh client source
139
Remarks
Use one of the
commands.
Available in
user view.