Displaying And Maintaining A Routing Table - HP HPE FlexNetwork 7500 series Configuration Manual

Step
4. Configure routing
policy-based recursive
lookup.

Displaying and maintaining a routing table

Execute display commands in any view and reset commands in user view.
Task
Display routing table information.
Display information about routes
permitted by an IPv4 basic ACL.
Display information about routes to a
specific destination address.
Display information about routes to a
range of destination addresses.
Display information about routes
permitted by an IP prefix list.
Display information about routes
installed by a protocol.
Display IPv4 route statistics.
Display brief IPv4 routing table
information.
Display the maximum number of
ECMP routes.
Display route attribute information in
the RIB.
Display RIB GR state information.
Display next hop information in the
RIB.
Display next hop information for direct
routes.
Clear IPv4 route statistics.
Display IPv6 routing table information.
Display information about routes to an
IPv6 destination address.
Display information about routes
permitted by an IPv6 basic ACL.
Display information about routes to a
range of IPv6 destination addresses.
Display information about routes
permitted by an IPv6 prefix list.
Command
protocol protocol nexthop
recursive-lookup route-policy
route-policy-name
Command
display ip routing-table [ vpn-instance vpn-instance-name ]
[ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ] acl
ipv4-acl-number [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
ip-address [ mask-length | mask ] [ longer-match ] [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
ip-address1 to ip-address2 [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
prefix-list prefix-list-name [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
protocol protocol [ inactive | verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
statistics
display ip routing-table [ vpn-instance vpn-instance-name ]
summary
display max-ecmp-num
display rib attribute [ attribute-id ]
display rib graceful-restart
display rib nib [ self-originated ] [ nib-id ] [ verbose ]
display rib nib protocol protocol [ verbose ]
display route-direct nib [ nib-id ] [ verbose ]
reset ip routing-table statistics protocol [ vpn-instance
vpn-instance-name ] { protocol | all }
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
[ verbose ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
ipv6-address [ prefix-length ] [ longer-match ] [ verbose ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
acl ipv6-acl-number [ verbose ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
ipv6-address1 to ipv6-address2 [ verbose ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ]
prefix-list prefix-list-name [ verbose ]
8
Remarks
By default, routing policy-based
recursive lookup is not
configured.