Brocade Communications Systems Brocade 8/12c Command Reference Manual page 962

22
snmpConfig
Use the --show mibCapability option to display the traps configurable under each MIB. For more
information, refer to the Fabric OS MIB Reference.
The following MIB configuration options are supported:
--set mibCapability
928
____________________________________________________
FA-MIB
connUnitStatusChange(1)
connUnitAddedTrap (2)
connUnitDeletedTrap (3)
connUnitEventTrap (4)
connUnitSensorStatusChange(5)
connUnitPortStatusChange (6)
____________________________________________________
FICON-MIB
linkRNIDDeviceRegistration (1)
linkRNIDDevicedeRegistration(2) 0x4
linkLIRRListenerAdded (3)
linkLIRRListenerRemoved (4)
linkRLIRFailureIncident (5)
____________________________________________________
HA-MIB
fruStatusChanged (1)
cpStatusChanged (2)
fruHistoryTrap (3)
____________________________________________________
FCIP-MIB
____________________________________________________
SCSI-MIB
iscsiTgtLoginFailure (1)
iscsiTgtLoginFailure (2)
iscsiTgtLoginFailure (3)
____________________________________________________
IF-MIB
linkUpTrap (3)
linkdownTrap (4)
____________________________________________________
BBD-MIB
bdTrap (1)
bdClearTrap (2)
Configures MIBs interactively. When used without a MIB name, this command
displays a menu with supported MIBs and associated traps, and for each MIB or
trap, you are prompted to confirm or change the default by specifying yes or no.
Specifying yes means you can access the MIB variables with an SNMP manager.
For two traps under the SW-TRAP category, the swEventTrap and the
swFabricWatchTrap, this command provides the option to specify a severity levels
to control the number of generated alerts. When a severity level is configured,
traps below the specified severity level specified are not sent. Refer to the
Examples section for an illustration. Specify one of the following values:
0
None (default)
1
Critical
2
Error
0x1 Enabled
0x2 Enabled
N/A Enabled
0x8 Enabled
0x10 Enabled
0x20 Enabled
0x40 Enabled
0x1 Enabled
0x2 Enabled
Enabled
0x8 Enabled
0x10 Enabled
0x20 Enabled
0x1 Enabled
0x2 Enabled
0x4 Enabled
0x8 Enabled
0x1 Enabled
0x1 Enabled
0x2 Enabled
0x4 Enabled
0x8 Enabled
0x1 Enabled
0x8 Enabled
0x10 Enabled
0x1 Enabled
0x2 Enabled
0x4 Enabled
Fabric OS Command Reference
53-1001764-01