Table of Contents
Advertisement
HDO9000 High Definition Oscilloscopes Operator's Manual
Copy Setups
To copy the setup of one trace to another of the same type (e.g., channel to channel, math to math),
drag-and-drop the source descriptor box onto the target descriptor box.
To copy the setup of a measurement (Px), drag-and-drop the source column onto the target column of
the Measure table. You can do the same for a qualifier (Qx) on the Pass/Fail readout table.
Change Source
To change the source of a trace, drag-and-drop the descriptor box of the desired source onto the
target descriptor box. You can also drop it on the Source field of the target setup dialog.
To change the source of a measurement, drag-and-drop the descriptor box of the desired source onto
the parameter (Px) column of the Measure table. You can do the same to a qualifier (Qx) on the
Pass/Fail readout table.
22
Advertisement
Table of Contents
