Avaya Communication Manager Administrator's Manual page 100

Managing Telephones
8. If the extension appears on the Usage screen, access the appropriate feature screen and
delete the extension.
For example, if extension 1234 is bridged onto extension 1235, type change station
1235 and remove the appearances of 1234.
9. Type change station 1234. Press Enter.
10. Delete any bridged appearances or personal abbreviated dialing entries. Press Enter.
11. Type remove station 1234. Press Enter.
The system displays the Station screen for this telephone so you can verify that you are
removing the correct telephone.
Tip:
Be sure to record the port assignment for this jack in case you want to use it
Tip:
again later.
12. If this is the correct telephone, press Enter.
If the system responds with an error message, the telephone is busy or still belongs to a
group. Press Cancel to stop the request, correct the problem, and enter remove station
1234 again.
13. Remove the extension from voice mail service if the extension has a voice mailbox.
14. Type save translations. Press Enter to save your changes.
Note that you do not need to delete the extension from coverage paths. The system
automatically adjusts coverage paths to eliminate the extension.
Now you can unplug the set from the jack and store it for future use. You do not need to
disconnect the wiring at the cross-connect field. The extension and port address remain
available for assignment at a later date.
Once you successfully remove a set, that set is permanently erased from system memory. If
you want to reactivate the set, you have to add it again as though it were a new telephone.
100 Administrator Guide for Avaya Communication Manager