Page 2
To customize an Optima Matrix Switcher simply mix and match from the available boards, add up the total slots those boards fill, and purchase enclosure(s) to accommodate that total. For systems comprised of 2 or more linked enclosures, AutoPatch will provide a link cable or hub at no additional charge.* Since each board has it’s own input and output connectors, the physical signal path must be routed from inputs on the board to outputs on the same board.
Page 3
VidEO BOaRd LiSt (CONt.) S-video (S-video connectors) Designed for S-video signals (50 MHz) Shown here: 8x8 S-video Board (BNC connectors) Designed for Y/c video signals (50 MHz) Shown here: 8x8 Y/c Board Wideband Video (BNC connectors) Designed for RGB and RGsB, video signals (300 MHz) design tip: Each board contains one BNC connection per input / output number.
Page 4
Listed here are front panel control options and our APWeb Expansion Board which provides a TCP/IP control interface. Only one panel is needed when multiple enclosures are linked together to work as one system. For more information on the capabilities of these control options as well as additional remote options please visit amx.com or contact the factory.