Delay Short - Yamaha DME64N Owner's Manual

NOTE
Delay Scale does not support the parameter link feature. Refer to "Parameter Link" on
linking.

Delay Short

Delay short components are available with from one to eight outputs. Each has a single input and from
one to eight outputs.
Double-click a component to display the component editor for it. Only the number of outputs in each
component is different. The other parts are the same.
Section Parameter
1
Delay All Bypass
2
Input Level
3
Mute
4
Delay Tap Delay
5
Level
6
On
7
Mute
8
Delay Scale
Delay-Short component editor
1
4
5
2
6
7
3
Setting Range
ON/OFF
- to ±0 dB
ON/OFF
ms: 0 to 130
Sample: the range depends
on the Fs value.
Meter: 0 to 44.7
Feet: 0 to 146.5
Frame: the range depends on
the Frame value.
Beat: the range depends on
the Beat value.
- to ±0 dB
ON/OFF
ON/OFF
ms
Sample
Meter
Feet
Frame
Beat
Chapter 6 Component Guide
page 81 for information on parameter
8
Function
Bypasses from input to output.
Sets the input signal level.
Mute the input signal.
Sets the delay time.
There are two edit boxes, displaying
milliseconds and the units selected for [Delay
Scale].
Sets the output signal level for each channel.
Turns ON each channel's delay.
Turns ON muting for each channel's output.
Selects the units for setting the delay time.
The selected button will light up, and the
units in the [Delay] edit box will change.
If [Beat] is selected, use the knob to set the
BPM (beats/minute).
DME Designer Owner's Manual 369