Yamaha DME64N Owner's Manual page 124

Chapter 3 Main Panel Window
[Controller]
Selects a controller from the list when [Parameter Value Edit] is set in [Function]. [Switch], [Fader],
or [Knob] can be selected.
[Label]
Enter a label. Double-click to enter the text. You can enter up to 16 characters of text. Set the value
with the <Enter> key, or cancel it with the <ESC> key.
NOTE
If [Scene Change], [Scene Increment], [Scene Decrement], [Mute], or [GPI Lock] is selected for [Function], the label
name is fixed.
[Parameter]
If [Scene Change], [Parameter Value Edit] or [Play Wav File], is set in [Function], set the
parameters.
If you click here, a list will be displayed.
[OK] Button
Applies any setting changes and closes the window.
[Cancel] Button
Closes the window without changing any settings.
124 DME Designer Owner's Manual
• When [Scene Change] is set in [Function]
Displays scenes that can be selected.
• When [Parameter Value Edit] is set in [Function]
Selectable parameters are displayed.
• When [Play Wav File] is set in [Function]
Selectable Wave files are displayed.