Yamaha DME64N Owner's Manual page 419

Surround
There are three types of surround pan components in the Surround subgroup: 3-1, 5.1, and 6.1.
The surround pan component editor has a two-dimensional surround pan graph where you can set the
location of the sound image.
Surround 6.1 component editor
8
1
Name
1
2D Surround Pan Graph
2
Speaker L
Button
3
C
4
R
5
Ls
6
Bs
7
Rs
8
LFE
9
Left-Right Position
)
Front-Back Position
You can set the sound location using the mouse in the two-dimensional surround pan graph.
The sound image location is displayed at the bottom of the two-dimensional surround pan graph, but
numbers cannot be entered there.
2 3 4
5 6 7
9 )
Location,
Setting Range
Left L63 F63
Center C F63
Right R63 F63
Left Surround L63 R63
Back Surround C R63
Right Surround R63 R63
Low Frequency
Effect (Sub Woofer)
L63 - C - R63
L63 - C - R63
Chapter 6 Component Guide
Function
-- Sets the sound image orientation. You can
move the sound image by clicking and
dragging.
Clicking here moves the sound image to the
button location.
-- Indicates that there is a sub woofer. Clicking
makes the LFE level 0 dB. The sound image
does not move by clicking.
Displays the LR sound image.
Displays the front-back sound image.
DME Designer Owner's Manual 419