Yamaha DME64N Owner's Manual page 185

Zone Object Properties
When you select a zone in the Area window, then click the [Properties] command on the [Edit]
menu, the "Area Properties" dialog box is displayed. Here you can set properties for zone objects.
The [Properties] command is also located on the context menu for zone objects.
[Text] Box
You can enter up to 100 English characters for the object name.
The object name is displayed in the rectangular box for the object. If there is a large number of
characters and the object's shape is too narrow, all characters might not be displayed.
[Font] Button
Clicking here displays the "Select Font" dialog box. This sets the font used to display the object
name.
For information about the "Select Font" dialog box, see
[Color] Button
Clicking here displays the "Select Color" dialog box. This sets the color of the object name text.
For information about the "Select Color" dialog box, see
Text Position
Sets the location of the text. The list to the left sets the vertical position of the text. The list to the
right sets the horizontal position.
• Vertical Position
Select [Top], [Center], or [Bottom].
• Horizontal Position
Select [Left], [Center], or [Right].
[Width] Box
Specifies the width of the object in pixels. The default is 50 pixels.
[Height] Box
Specifies the height of the object in pixels. The default is 50 pixels.
page 236.
page 237.
DME Designer Owner's Manual
Chapter 4 Designer
185