Yamaha DME64N Owner's Manual page 107

• [Play Wav File]
GPI input can be used to initiate playback of the specified Wave file.
[Parameter] specifies the Wave file to be played. Files specified by the Wav File Manager can
be selected. Wave files can only be selected if a Wav Player is included in the DME
configuration.
[Min], and [Max] are not available.
[Terminal] determines how the GPI input voltage will affect the specified parameter.
and specify continuous control of continuously-variable parameters from an external
fader, knob, or similar device.
and specify on/off control of 2-state parameters via an external switching device.
The specified Wave file will be played each time the voltage applied to GPI IN rises from below to
above the median voltage.*
Max. voltage applied to GPI IN
Min. voltage applied to GPI IN
The specified Wave file will be played each time the voltage applied to GPI IN drops from above to
below the median voltage.*
Max. voltage applied to GPI IN
Min. voltage applied to GPI IN
Same as .
Same as .
* "Median voltage" refers to the voltage halfway between the maximum and minimum voltages detectable by the GPI
input terminals. Refer to the DME owner's manual for details on GPI voltages.
Median voltage
Trigger
Trigger
Median voltage
Chapter 3 Main Panel Window
DME Designer Owner's Manual 107