Yamaha DME64N Owner's Manual page 401

Delay Matrix
This is a matrix mixer that allows you to set an independent delay time and level adjustment for each
output. There are three groups of delay matrix, based on the number of inputs: 2 Input, 4 Input, and 8
Input. In each of the three groups there are five mixers available with 2, 4, 8, 12, or 16 outputs, for a
total of 15 components.
Double-click a component to display the component editor for it. The number of input and output
channels varies depending on the component, but all share a common configuration in the
component editor.
The delay matrix component editor consists of four sections: input, output, matrix, and block. The
[Master] buttons in the [Input] and [Output] sections display windows where you can make master
input and output settings. Delay and level for each channel are set in separate windows that display
four channels each.
2
1
Delay Matrix component editor
3
Chapter 6 Component Guide
2 Input
4 Input
8 Input
4
5
6
7
DME Designer Owner's Manual 401