Yamaha DME64N Owner's Manual page 214

Chapter 4 Designer
Slot Component Properties
To display the "Slot Component Properties" dialog box, select a Slot component object, then click
the [Properties] command on the [Edit] menu.
[Label] Box
You can enter up to 100 characters to display over the object.
[Width] Box
Specifies the width of the object in pixels.
[Height] Box
Specifies the height of the object in pixels.
[Style]
Sets the style of the object. From the list, select [Plain], [Raised], or [Sunken].
[Label Font] button
Sets the font for the label. Clicking here displays the "Select Font" dialog box.
For information about the "Select Font" dialog box, see "'Select Font' Dialog Box"
[Label Color] Button
This sets the color of the label text. Clicking here displays the "Select Color" dialog box.
[Inputs/Outputs Label Color] Button
Sets the color for the I/O port label text. Clicking here displays the "Select Color" dialog box.
[Color] Button
Sets the color of the object. Clicking here displays the "Select Color" dialog box.
NOTE
For information about the "Select Color" dialog box, see "'Select Color' Dialog Box"
[Edit I/O Port Label] Button
Specifies the I/O port label. The "Edit Port Label" window opens when this button is clicked.
[OK] Button
Updates the settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
214 DME Designer Owner's Manual
(page 236).
(page 237).