Network Setup - Yamaha DME64N Owner's Manual

Network Setup

Click the [Network Setup] item in the [Hardware] menu to open the "Network Setup" window.
This window can be used to set the IP address and device group master/slave status of DME and
SP2060 units.
NOTE
These settings can be edited regardless of the current settings of the DME and SP2060 units. The DME Utility screen
Lock page and SP2060 Utility screen User Lock settings only apply to the device panels.
NOTE
DME64N/24N slave devices will not be displayed.
NOTE
The settings cannot be changed for devices in a device group that is online.
"Network Setup" Window
Names and Functions
MIDI Port List (Tx/Rx)
Selects the device to be set up.
Device Group
Displays and sets whether the DME or SP2060 unit connected to the port specified by Port Select
is the device group master or slave.
IP Address
Displays and sets the IP address of the DME or SP2060 unit connected to the port specified by
Port Select.
NOTE
If the device group master IP address is changed and you are using the DME-N Network Driver, quit the DME Manager
and then restart it after changing the DME-N Network Driver settings.
Chapter 3 Main Panel Window
DME Designer Owner's Manual 145