Scene Recall - Yamaha DME64N Owner's Manual

Scene Recall

This procedure recalls a new scene (refer to
page 468).
1.
Press the [SCENE] button.
The Scene Recall display will appear.
2.
Select a new scene.
Scenes are selected as described in the "List
Parameters" section on page
3.
Press the [ENTER] button.
A confirmation window will appear.
4.
Press the [ENTER] button again.
The new scene will be selected.
NOTE
If head amplifier parameters are included in the recalled
scene data, the head amplifier settings will be changed
accordingly.
469.
Scene Store
Stores the current scene data for later recall.
1.
Press the [SCENE] button for longer than
2 seconds.
A confirmation window will appear on the display.
2.
Press the [ENTER] key.
This stores the scene data in the current scene
memory.
N OTE
Press the [CANCEL] key if you want to abort the scene store
operation.
Chapter 6 Component Guide
DME Designer Owner's Manual 471