Yamaha DME64N Owner's Manual page 403

Click to open the "In 1-4 x
Out 1-4" Crosspoint window.
Input Master
If you click the [Input Master] button in the delay matrix component editor, it will open the [Delay
Matrix - InputMaster] editor window. Here you can turn the master input for each channel ON and
OFF and set the level.
[Delay Matrix - InputMaster] editor window
1
2
3
4
Section
1
Input Phase
2
Level
3
Solo
4
On
5
Block On
6
Off
7
Nominal
8
Minimum
Click to open the "In 5-8 x Out
5-8" Crosspoint window.
Parameter Setting Range
ON/OFF
- to +10 dB
ON/OFF
ON/OFF
--
--
--
--
Chapter 6 Component Guide
For 2 input matrix, click to
open the "In 1-2 x Out 1-4"
Crosspoint window.
5
6
7
8
Function
Reverses the phase of each channel's signal.
Sets the level of the signal from each channel's
input.
Turns ON solo for each channel. If Solo is engaged
for even one channel, all non-Solo channels will be
muted.
Turns ON each channel's input.
Turns ON input for all channels in the Input Master
window. When turned ON, the [On] button lights up.
Turns OFF input for all channels in the Input Master
window.
Resets all input signal levels in the Input Master
window, making them 0 dB.
Resets all input signal levels in the Input Master
windows, making them - dB.
DME Designer Owner's Manual 403