Yamaha DME64N Owner's Manual page 42

Chapter 2 DME Designer Overview
8
Display the "Synchronization" dialog box.
Click [Synchronization] in the [Tools] menu or the large [Synchronization] button on the toolbar.
When the dialog box opens, a list of connected DME and SP2060 units will be obtained.
DMEs and SP2060s connected to the computer are displayed in the [Network] list.
NOTE
When requesting the "Synchronization" dialog box, a one-time alert will be displayed if the MIDI Port settings have not
been made. After clicking the [OK] button on the alert, a dialog will open. At this time, you can make the needed settings
in the displayed dialog box, and then again display the "Synchronization" dialog box.
9
Device Group Selection
Select the device group to be synchronized from the [Group] list in the [Synchronization] window.
NOTE
Only one device group can be online in one operation.
10
IP Address Selection
The DMEs and SP2060s included in the current device group are displayed in the [Designer] list in
the "Synchronization" dialog box. Click the [IP Address] box, then select the DME or SP2060 unit IP
address that matches the DME or SP2060 currently in the DME Designer.
NOTE
Click [ ] to display the IP addresses of all similar devices in the area.
42 DME Designer Owner's Manual