Yamaha DME64N Owner's Manual page 181

[Save User Module]
This command can be used only when a User Module is selected in the Configuration window.
Saves a template for the selected user module.
"User Module Manager" Dialog Box in "User Modules"
[User Module Manager]
Displays the "User Module Manager" dialog box. Changes the settings of, renames, or deletes a
user module saved as a template.
"User Module Manager" Dialog Box in "User Modules"
[Show Signal Delay]
The digital signal delay value is displayed in the configuration window with sample units.
"Show Signal Delay (Delay Display Value)" in "Configuration Window"
[Analyze]
Displays the "Analyze" dialog box, and analyzes the configuration.
"Analyze (Configuration Analysis)" in "Configuration Window"
[Probe Monitor]
Turns the probe monitor ON or OFF. This command can be selected only when a Configuration
window or User Module window is active while in online status.
"Probe Monitor" in "Configuration Window"
[Monitoring Point List]
Opens the "Monitoring Point List" dialog box. Registers points for monitoring with headphones.
"Monitoring Point List" in "Configuration Window"
[Edit Mode]
Turns the edit mode ON or OFF.
"Edit Mode" in "Editing Configurations"
NOTE
Only users for whom the [Operation Security]
select this command.
[Sheet]
Opens the "Sheet" dialog box. Sets the sheet size and background.
"Sheet" in "Objects" (page
[Prohibit Diagonal Connections]
All connections will be drawn with horizontal and vertical wires only. Diagonal wires cannot be
drawn.
"Drawing Settings" in "Drawing and Editing Wires"
[Grid]
Opens the "Grid" dialog box. Displays or hides the grid and sets the grid spacing.
"Grid" in "Design Window Shared Settings and Operations"
[Arrow]
The mouse cursor appears as crosshairs, and can be used to select objects.
(page 279)
(page
(page 163)
[Edit] checkbox in the "Security" dialog box has been checked can
234)
(page
Chapter 4 Designer
(page 287)
(page 290)
(page 281)
(page 284)
282)
257)
(page 243)
DME Designer Owner's Manual 181