Yamaha DME64N Owner's Manual page 92

Chapter 3 Main Panel Window
[Event Schedule]
Set the year/month/date to start the event.
Calendar
Sets the date the event will start.
Change the year and month using the [<] and [>] buttons. Click on a day to set that date. February
29 can be set on the calendar, where it appears every four years (each leap year).
[Time]
Sets the time the event will start.
Click the hour and minute, then set numerical values using the spin boxes.
Only the time is set for periodic events.
[Repeating Event]
When a check is placed here, the event becomes a periodic event, and the calendar is ignored.
• [Year]/[Month]/[Week]/[Day]/[Hour]
• [Day]/[Day of the week]
[Exception] Button
Opens the "Event Exceptions" dialog.
[OK] Button
Applies any setting changes and closes the window.
92 DME Designer Owner's Manual
Set the period for the event, using the radio buttons to the left.
Set the conditions on the right side. Select [Day]/[Day of the week], and set the date and other
information. The items that can be set vary according to the selected period.
When the event period is [Year]
All settings can be made.
When the event period is [Month]
If [Day] is selected, only the date can be set.
If [Day Of The Week] is selected, the week of the month and day of the week is set.
When the event period is [Week]
Only [Day Of The Week] can be selected. Set the day of the week.
When the event period is [Day]/[Hour]
Condition settings on the area on the right are not needed.