Yamaha DME64N Owner's Manual page 380

Chapter 6 Component Guide
1
2
3
4
5
6
7
8
9
)
380 DME Designer Owner's Manual
Name
Gate Curve
Gain Reduction Meter
Output Meter
Parameter Setting Range
Threshold -54 dB to ±0 dB
Range -70 dB to ±0 dB
Attack 0 to 120 ms
Hold 44.1 kHz: 0.02 ms to 2.13 s
48 kHz: 0.02 ms to 1.96 s
88.2 kHz: 0.01 ms to 1.06 s
96 kHz: 0.01 ms to 981 ms
Decay 44.1 kHz: 6 ms to 46 s
48 kHz: 5 ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
KeyIn Mono
Stereo
On ON/OFF
+20
+10
0
–10
–20
–30
–40
–50
–60
–70
Displays results graphically. The horizontal axis is
the input signal level, and the vertical axis is the
output level.
Displays the gain reduction attenuation.
Displays the output signal level.
Sets the threshold value.
Sets the amount by which the level is reduced.
Sets the attack time.
Sets the hold time.
Sets the decay time.
The setting range may very, depending on the
operating frequency.
SELF Selects the trigger source from a menu. The
KEYIN currently selected trigger source is displayed on the
button.
L
R
LR BOTH
KEYIN
Turns the gate ON.
Threshold = –20dB
Range = –25dB
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Input Level (dB)
Function
Function