Notch Filter (Notch) - Yamaha DME64N Owner's Manual

Notch Filter (Notch)

The notch filter attenuates the signal within a specified frequency band, while passing frequencies
outside that band. There are two types of notch filter components: mono channel and stereo channel.
Mono channel notch filters have one input and one output. Stereo channel notch filters have two of
each.
Double-click a component to display the component editor for it. The parameters are the same for
mono channel and stereo channel components.
Section
1
Input Level
2
Phase
3
Notch Frequency
4
Q:
5
Bypass
6
Output Level
Notch component editor
1 6
3
4
2 5
Parameter Setting Range
- to +10 dB
ON/OFF
20 Hz to 20 kHz
0.1 to 63.0
ON/OFF
- to ±0 dB
Chapter 6 Component Guide
Function
Sets the input signal level.
Reverses the phase of the input signal.
Sets the center frequency.
Sets the band width of the frequency band
that will be changed
Turns bypass ON.
Sets the output signal level.
DME Designer Owner's Manual 391