Yamaha DME64N Owner's Manual page 447

Slot Out
The Slot Out component has only an input. There are three types of Slot In components: four-
channel, eight-channel, and 16 channel types.
The component editor can be displayed by right-clicking the component, then clicking [Open Slot Out
Component Editor] on the displayed context menu.
Slot Out component editor
1
3
4
2
5
Parameter
1
Phase
2
On
3
Delay
4
Level
5
Dither
Setting Range
ON/OFF
ON/OFF
0 to 24 Samples
- to ±0 dB
Off
16
20
24
Function
Reverses the phase of the output signal for each
channel.
Turns ON each channel's output.
Sets the delay time.
Sets the output level.
Sets the quantization bit rate for conversion.
DME Designer Owner's Manual
Chapter 6 Component Guide
447