Yamaha DME64N Owner's Manual page 411

Input Master
If you click the [Input Master] button in the matrix mixer component editor, it will open the [Matrix
Mixer - InputMaster] editor window. Here you can turn the master input for each channel ON and
OFF and set the level.
[Matrix Mixer - InputMaster] editor window
1
2
3
4
Section Parameter
1
Input Phase
2
Level
3
Solo
4
On
5
Block On
6
Off
7
Nominal
8
Minimum
Setting Range
ON/OFF Reverses the phase of each channel's signal.
- to +10 dB Sets the signal level from each channel input to the
output bus.
ON/OFF Turns ON solo for each channel. If Solo is engaged
for even one channel, all non-Solo channels will be
muted.
ON/OFF Turns ON each channel's input.
-- Turns ON input for all channels in the Input Master
window. When turned ON, the [On] button lights up.
-- Turns OFF input for all channels in the Input Master
window.
-- Resets all output signal levels in the Input Master
window, making them 0 dB.
-- Resets all output signal levels in the Input master
window, making them - dB.
Chapter 6 Component Guide
5
6
7
8
Function
DME Designer Owner's Manual 411