Yamaha DME64N Owner's Manual page 207

External Device Properties (AD824, AD8HR "Serial Controlled Device
Properties" Dialog Box)
To display the "Serial Controlled Device Properties" dialog box, select AD824 or AD8HR, then click
the [Properties] command on the [Edit] menu.
This dialog box is the same as the "External Device Properties" dialog box, except for [Remote].
Remote
Select the DME you will control remotely from AD824 and AD8HR.
• [DME Unit]
The DMEs in the current configuration will be displayed in a list. Select the DME you will
control remotely.
• [ID]
Selects an ID from 1 to 8. The default is 1.
Chapter 4 Designer
DME Designer Owner's Manual 207