Yamaha DME64N Owner's Manual page 231

Chapter 4 Designer
Wire Object Properties
To display the "Wire Properties" dialog box, double-click on a wire object. You can also select a
wire object, then click the [Properties] command on the [Edit] menu.
[Line Width] Box
Set the line width. This setting can range from 1 to 10 pixels.
[Line Type]
Displays a list where you can select the type of line. The following types are available: [Solid],
[Dash], [Dot], [DashDot], and [DashDotDot].
[Line Color] Button
Sets the color of the line. Clicking here displays the "Select Color" dialog box.
[Selected Color] Button
Sets the color of the selected line. Clicking here displays the "Select Color" dialog box.
NOTE
For information about the "Select Color" dialog box, see page 237.
[OK] Button
Accepts the changed settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
DME Designer Owner's Manual 231