Yamaha Commercial Audio
4.2
SETUP
Press the [SETUP] button below the StageMix logo to open a new window
which allows user preferences to be selected.
iPad Status Bar
The iPad's Status Bar is visible in this screen, allowing the WiFi signal
strength and the battery charge status to be viewed.
Press [Done] in the top-right corner to return to the Mixer window.
4.2.1 Fader Delay
This is a safety function to avoid accidental fader movements. The
value set here is the time needed to wait between touching a fader and
being able to move it.
4.2.2 Filled EQ Graph
When this preference is ON, the EQ graph will be filled in, as it is on the
LS9 screen. When it is off, only the outline of the graph will be shown.
4.2.3 Set EQ band to 0dB with Double-Tap
When this preference is ON, Parametric and Graphic EQ Gains can be
set to 0dB by double-tapping on the EQ band.
4.2.4 Channel Select – StageMix Follows Console
When this preference is ON, the currently selected channel in the
StageMix Parametric and Graphic EQ screens will follow the Selected
Channel in the LS9.
4.2.5 Channel Select – Console Follows StageMix
When this preference is ON, the Selected Channel in the LS9 will follow
the currently selected channel in the EQ screens of StageMix.
LS9 StageMix V1.0 User Guide
Page 12