Yamaha DME64N Owner's Manual page 43

Chapter 2 DME Designer Overview
11
Going Online.
Clicking the [Go On-Line] button displays a dialog box where you can decide the synchronization
method.
NOTE
An alert will be displayed if no scene has been recalled.
Click the [Designer Device] direction button.
Transfer of the configuration will begin, and DME Designer will be synchronized with the unit.
If there are many zones, this process may take time.
When going online is finished, the [Go On-line] button will be grayed out, and the Main Panel
window [On-Line] button will light up. The dialog box will close automatically if [Close this window
after synchronization] is checked.
NOTE
It may not be possible to go online if a scene has not been stored when [Recall Safe] is selected.
DME Designer Owner's Manual 43