Yamaha DME64N Owner's Manual page 287

Saving User Modules
Saved user modules are displayed under [User Module] in the Toolkit window, and can be used as
templates.
NOTE
User modules placed in the component editor are saved in the project file. When you want to use a user module in another
configuration in the same project, save it using the "Save User Module" command.
Save the User Module using the [Save User Module] command on the [Tools] menu. The [Save User
Module] command can be used only when a user module is selected in the Configuration window.
When you select the command, the "Save User Module" dialog box will be displayed. Enter a name for
the User Module, then click the [OK] button.
Set [Double Click Action] and [Security Settings] at the lower part of the "Save User Module" dialog
box.
They correspond to the same items in the "User Module Manager" dialog box. When saved with
different settings than the "User Module Manager" dialog box, the saved settings are immediately
applied.
Double Click Action
Initial setting of the window that opens when you double-click on a user module placed in the
component editor.
[Open User Module Design Window]
Opens the User Module Design window.
[Open User Module Editor]
Opens the User Module editor.
Chapter 4 Designer
DME Designer Owner's Manual 287