Surround 6.1
Surround 6.1 has surround pan with three channels in front, three in the rear, and one sub woofer
channel. There is one input and seven outputs.
Double-click a component to display the component editor for it.
Surround 6.1 component editor
2
1
2
Section
Name/Parameter
1
2D Surround
2D Surround
Pan Graph
Pan Graph
2
Speaker Button
3
Position
Left-Right Position
4
Front-Back Position
5
Divergence
Front
6
Rear
7
LFE
Level
8
Pan Nominal Position
3 4
Setting Range
--
Sets the sound image orientation. You can
move the sound image by clicking and
dragging.
--
Clicking here moves the sound image to the
button location.
L63 - C - R63
Displays the LR surround location.
F63 - C - R63
Displays the front-back surround location.
0 to 100%
Sets the ratio for sending the front-center
signal to front L and front R.
0 to 100%
Sets the ratio for sending the rear-center
signal to rear L and rear R.
- to +10 dB
Sets output level to the sub woofer.
Center
Selects the nominal position from a menu.
LR
Chapter 6 Component Guide
5
6
7
8
Function
DME Designer Owner's Manual
423