Dme Data File - Yamaha DME64N Owner's Manual

Chapter 2 DME Designer Overview
Double-Click the Icon for the Project File
When you double-click the icon for the project file, the file will open. If DME Designer is not started,
it will start. After logon, the project file will open.
Just as when you use the [Open] command, if DME Designer is already started, the currently open
project file must be closed before another one can be opened. Therefore, a "Project file has been
modified. Save?" dialog box will be displayed.
NOTE
Sometimes the "Project file has been modified. Save?" dialog box will not be displayed.
If security is set for the project file, the "Enter ID & Password" dialog box will be displayed. Enter
the ID and password to open the file.
Closing Project Files
You cannot have multiple project files open simultaneously in DME Designer. To close the currently
open project file, you can create a new project file or open another project file.

DME Data File

You can import or export parameters for a DME or SP2060 that is arranged in a configuration file.
Parameters for a single DME or SP2060 unit in the current configuration (the one being edited) are
saved as a file. Saved parameters can be imported into another project file.
Files with parameters saved in them are called
extension for their filenames.
34 DME Designer Owner's Manual
"DME Data Files." These files have ".ddf" as the