MIDI Port Setup
Click the [Port] item in the [Setup] menu to open the "Port" window. In this window you can set the
MIDI port of the master current device to be used by the DME Designer.
NOTE
Only USB 1 is available on DME8i-C/DME8o-C/DME4io-C.
"Port" Dialog Box
Selects the MIDI driver used for transmitting and receiving MIDI messages.
[Tx]
Selects, from a list, the MIDI driver used for transmitting MIDI messages.
[Rx]
Selects, from a list, the MIDI driver used for receiving MIDI messages.
[Group]
Select the device group to be set up from the list.
Chapter 3 Main Panel Window
DME Designer Owner's Manual
135