Status Bar - Yamaha DME64N Owner's Manual

Chapter 4 Designer
[Zoom Out]/[Zoom In]/[Actual Size]/[Zoom To] Buttons
These buttons correspond to the commands on the [View] menu with the same names. Changes
the magnification of the display on the screen.
[Arrow] Button
The mouse cursor appears as crosshairs, and can be used to select objects.
[Hand] Button
The mouse cursor appears as a hand shape, and can be used to click and "grab" the worksheet
for scrolling.
[Edit Mode] Button
Turns the edit mode ON or OFF.

Status Bar

DME ID/Component ID
DME ID/Component ID
When the mouse pointer is moved over a DME device in the Zone window, the ID for that DME
device is displayed. When the mouse pointer is moved over a component in the Configuration
window, the ID for the component is displayed.
Sampling Frequency
Displays the sampling frequency in the configuration window.
Sheet size
Displays the size of the sheet in the active design window.
Coordinates
Displays the coordinates of the mouse pointer any time it is within the design window. When
dragging an object, the coordinates displayed here refer to the upper left corner of the object
being dragged.
166 DME Designer Owner's Manual
"[View] Menu" in "Designer Window Menus"
"Edit Mode" (page 166) in the "Configuration Editing" section.
Sampling Frequency
(page 178)
Sheet Size Coordinates