Yamaha DME64N Owner's Manual page 374

Chapter 6 Component Guide
1
2
3
4
5
6
7
8
9
)
!
374 DME Designer Owner's Manual
Name
Compressor Curve
Gain Reduction Meter
Output Meter
Parameter Setting Range
Threshold -54 dB to ±0 dB
Ratio 1:1 to :1
Knee HARD, 1, 2, 3, 4, 5
Attack 0 to 120 ms
Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
Gain ±0 dB to +18 dB
KeyIn Mono
Stereo
On ON/OFF
+20
+10
0
–10
–20
–30
–40
–50
–60
–70
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Displays results graphically. The horizontal axis is
the input signal level, and the vertical axis is the
output level.
Displays the gain reduction attenuation.
Displays the output signal level.
Sets the threshold value.
Sets the compression ratio.
Sets the way compression is applied.
Sets the attack time.
Sets the release time.
The setting range may very, depending on the
operating frequency.
Sets the output gain.
SELF Selects the trigger source from a menu. The
KEYIN currently selected trigger source is displayed on the
button.
L
R
LR BOTH
KEYIN
Turns the compressor ON.
Ratio=2:1
Knee = Hard
Threshold= –20dB
Input Level (dB)
Function
Function