Delay Time - Yamaha M7CL Owner's Manual

G

Delay time

The millisecond delay time value is shown above the knob.
The delay time value in the units selected in the DELAY SCALE field (
▲ ▼
Click the / buttons to make detailed settings.
H Delay time knob
This knob sets the delay time of the output port. Rotate (by dragging) this knob to set the delay time.
I Ø(Phase) button
Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase
(orange).
J
ATT knob
Adjusts the amount of attenuation for the signal assigned to the output port. To change the value, rotate (by drag-
ging) the knob in the screen. You can adjust the setting in 0.1 dB steps over a range of –96 to +24 dB. The current
value is shown immediately below the knob.
K
Level meter
This meter indicates the level of the signal assigned to the output port.
B
) is shown below the knob.
81 M7CL V3 Editor Owner's Manual